GNS 480 Flight Plans

I will start off this post by saying I will miss my FlightStream 210!  Ok, with that out of the way lets address flight planning on the GNS 480.

Todays flight will be from Ocean City, MD (KOXB) to Wilkes-Barre, PA (KAVP). This is a typical mission for Mary and I so it will help me and hopefully help others that may have questions on this legacy unit.

The Plan



 KOXB - ENO - V29 - LVZ - KAVP

 

I like to use the ForeFlight Web program to put my plan together and save it, which makes it available on my other devices.

First things first, we need to select FPL and then on the following screen select NEW.

On this screen we enter the Origin, in this scenario we'll use Ocean City, KOXB. Then push MENU/ENTER.

Next screen will require a destination, we'll use Wilkes-Barre, PA KAVP.  Then push MENU/ENTER again.

Once the origin and destination are selected the next screen offers two choices, MODIFY or WPT (waypoint). Select WPT and enter the next fix or the entry point for a victor airway. My selection in this case meets both needs, the Smyrna VOR ENO. You guessed it, then push MENU/ENTER.

Once again, scroll to select the entry waypoint ENO and you will have an additional choice, ARWY (airway). Based on my initial Foreflight plan I will select ARWY and scroll through for V29. Yep, then push MENU/ENTER.



Again, the initial Foreflight plan notes the exit point of V29 as the Wilkes-Barre VOR, LVZ. Scroll through the choices, they are in alphabetical order, and select LVZ. As you can see the 480 populates the flight plan with each fix along V29.  Once again, push the MENU/ENTER.

At this point the flight plan is complete. However, we have a discontinuity .  Use the CRSR to scroll down and CLR this issue.

Discontinuities between two points are a common feature of Flight Management Systems. It is a reminder that you haven't spelled out an IFR route between the two points. If you add an approach to KAVP that uses LVZ in the procedure it will disappear automatically. Since I don't know what approach I will get upon arrival I'll clear it now then add in the approach when assigned.

If you XPND (expand) the flight plan you can scroll through each fix along the route. The airway feature makes programing easy, not as easy as taking advantage of the FlgihtStream 210 one click transfer to the 430/530, but it really is an improvement over those GPS 430/530 units.

 

I think you will see the versatility of the 480 when it comes to making changes on the go and programing holds, as previously covered on this blog.

Memorial Day

We remember. Thank you to those that have served, those protecting this Nation today, and the families that have sacrificed so much, all in the name of freedom.

N453TC Rides Again!

I was up early and ready to head to the airport, I really needed to dial it down a bit.  Since I am still waiting for transition training, Bill B, 3 Tango Charlie's previous owner, introduced me to Bill H.  Bill H is a Commander 112A 390 Super® Commander owner. We agreed to meet this morning at 8AM on the ramp at Ocean City (KOXB).

Of course I was at the airport at least an hour ahead of time, wanting to have everything ready. I did a final walk around and sumped the fuel. Everything looked perfect so I hooked up the electric tug and helped 3 Tango Charlie out into the sun...er..um...high overcast sky.

Bill was right on time and I managed to capture him landing and his taxi into parking. We chatted for a bit then after closing up the hangar we climbed aboard 3 Tango Charlie.  I would be right seat today, no PIC time for me. I still need the transition training.

My adrenaline was pumping, I was eager to get in the air. Bill called clear prop and turned the key....nothing.  What?  He tried again and just maybe one blade. Hmmm... I had the charger on the whole time, maybe not plugged in far enough. I managed to climb back out and get my SUV started and parked near the aircraft battery access external hook up. 3 Tango Charlie took two tries but finally roared to life. I parked the SUV and climbed aboard, lets try this again. The airport was busy today, school planes working the pattern along with transient traffic coming in for the holiday weekend. We were up, the next to roll for take off. Bill gave 3 TC power and we were rolling, a bit longer roll then 08Romeo or the Deb but we were climbing out.

It was a nice flight and I learned a lot from Bill. The controls felt comfortable and responsive. 3 TC trimmed out very nice and behaved well. We flew south over Assateague and then turned towards Salisbury minding airspace along the way. Eventually I turned 3 TC for the beach just shadowing north of RT 54 heading over Fenwick, Delaware. With a turn south I followed the shore and swapped control back over to Bill so he could set up for landing. We worked our way into the pattern announcing downwind base and final. I was the human sponge, soaking up everything I could. Bill made a sweet roll it on landing and we taxied clear.

Once shut down we gave it a minute or two then tried the hot start procedure. It was different then what Bill uses on his Super Commander but I noted his procedure and will amend my checklist as needed.

Bill had to scoot, he had plans with his bride. I captured some footage of his start up, taxi out, and his take off.  Thank you Bill for your flight time today, it was very much appreciated. Also, thanks to Bill B, for the intro, for a great aircraft, and your friendship.

I just have to share a few of the emails I received when 3TC's flightAware track alerted.

Finally!  See you out there poking holes in the sky, Gary!   Judi

N453TC rides again....At last, at last...  Thank goodness it's free at last!   Hope big smiles all around.  Bill
 
Yep, I can see the bugs in his teeth from here, brother Bill! LOL, Go Gary!  Judi

FYI - I did try the Crazed Pilot headset today. My opinion is that it's not nearly quiet enough, it hurt my ears, and the mic made me sound like Mickey Mouse.  This headset will be stored away for emergency use only.

GNS 480 Holds

One nice feature of the GNS 480 is the ability to create a hold at any waypoint.  Once you select the waypoint from the flight plan or the data base you have the ability to select the inbound course, right or left turns, time or distance for the inbound leg and miles or time for the values.

As seen in the picture above I created a flight plan for Ocean City (KOXB) to Wilmington Delaware (KILG)with ENO VOR as a waypoint. On this simulated flight I set up a hold at ENO, pictured below.

A holding clearance issued by ATC will include at least the following items:

• a clearance to the holding fix
• the direction to hold from the holding fix
• a specified radial, course, or inbound track
• if DME is used, the DME distances at which the fix end and outbound end turns are to be commenced (hold between [number of miles] and [number of miles]). If the outbound DME is not specified by ATC, pilots are expected adhere to the standard holding pattern timing procedures
• the altitude to be maintained
• the time to expect further clearance or an approach clearance or the time to leave the fix in the event of a communications failure

Let's role play a bit. ATC clears us as follows. 

N453TC you are cleared direct Smyrna (ENO) VOR, hold east on the 090° radial, expect further clearance at 0930Z.

This tells us what we need to set up and fly the hold. The unspoken info is, since no distance or time was given, is to fly one minute legs and a standard right hand pattern. Remember, standard hold patterns (right) are the opposite of the standard landing patterns (left). 

In order to be inbound on the 090° radial I set up on a 270°, I left the default right turns and one minute inbound selections.

In the above picture you can see the racetrack hold displayed on the GPS at the ENO VOR.

Above you can see the hold listed on the flight plan page. Once everything is entered you must select the EXEC button on the bottom to execute the modified plan. I continued to fly the flight plan and after one loop in the hold, and approaching ENO, I clicked on the SUSP button to resume the original flight plan.

I must say it was pretty easy, we'll see how it goes in flight, eventually under the hood. I have been previously spoiled by the FlightStream 210 and 'sending' every change to the 430/530 with a touch of a button. At least there is an autopilot to help when it gets busy or in IFR conditions.

Learning the Garmin 480

 

I have been a long time fan of the "Buttonology" posts on forums, YouTube videos, and training web sites. I have even put together a few of my own and provided a link to what I have compiled over the years.

Granted, my "how to" posts have all been geared towards the Garmin 430/530 series of GPS units. Things are about to change, with my recent aircraft purchase I am now faced with learning a new GPS unit, the Garmin GNS 480.

In addition to GPS navigation, the all-in-one GNS 480 combines a built-in 760-channel VHF comm radio with 200-channel VOR, glideslope and localizer receivers. View graphics in crisp detail on its 256-color, high-resolution, sunlight readable moving-map LCD display. Useful features include multiple frequency storage, standby frequency monitoring, digital CDI, voice prompting and audio alerts, auto-decoding of Morse code station identifiers and single-nav cross check of position fixes, along with airway segments to include V,C,N,Q , and T routes. Holds can be inserted at any waypoint, whether on or off your flight plan.

Audio callouts are another 480 feature. The box announces 500 feet, missed approach point, and if an ILS approach is loaded, localizer alive. The 500 feet callout is handy for a final warning to check that your gear are down.

The 480, unlike the 430/530 navigators, has a NAV page that displays an HSI with a glideslope when an ILS or VNAV or LPV approach is loaded. The 480 also has the ability to customize the data fields on the four different map pages.

Over the next few weeks I plan on posting info on routing, holds, creating waypoints, and intersecting that point in space that ATC sends us to along some VOR radial.

Hangar Time

Today, Ziva got us going pretty early.  By the time Mary and I were enjoying our first cups of coffee and tea, Ziva was ready to go.

It was a long day for all of us on Saturday with the neighborhood yard sale.  Ziva spent some time outside with us but we both thought it was getting too warm for her on the driveway, even with her blanket.

So, today we decided we would take our baby girl out for some play time. We headed to the airport so she could turn it loose, and she did.  Not much for chasing the ball today, I think she tired herself just ripping back and forth along the fence lines.

Once she was worn out we gave her ramp a second try and she did just fine. It's a royal PITA hauling the ramp so I'm not sure if we will use it or revert back to helping her in the back of our SUV.

Once we were all loaded up I noticed one plane waiting to enter runway one-four. I quickly checked the weather Application for current METARs. It was not looking good.

My personal minimums are at least seven to eight hundred feet depending on the surrounding terrain. To each their own, that's why they are personal minimums. I did go check on FlightAware if the aircraft at least filed an instrument flight plan, they did not, or at least they didn't open it on the ground.  

Transition training update...

The CFII in Doylestown just returned from California and he is going to call this evening and schedule my training.

Vlog Update 5/10/2019

My Trackform bracket came in the mail yesterday so today was test fit day.  I loaded up the Ziva girl and was off for the hangar.  

First it was play time.  Ziva ran up and down the north fence line then played fetch for just a few throws.  She was done in and ready for some cold water I keep in the mini fridge.

I had two visitors, John the lineman and Chet my hangar neighbor.  John played with Ziva, she loves John, then he checked out the new plane. John said he is looking forward to a ride when I get checked out.

Chet and I talked video equipment and touch up paints. Chet is getting ready to head to the Bahamas, I'm so jealous. I said to Chet, I would stop by his hangar when I finished mounting the new bracket and giving it a test run.  With that, he was back in his truck and heading to the B hangars. 

I got busy setting up the mount and hooking up the video and audio cable. I did notice that there needs to be an additional spacer for the opposite side headrest post to keep it level and secure. I plan on cutting a one inch PVC conduit, and putting it back together with the wide roll of electrical tape. It will be neat and clean, and provide the balance of support for the headrest. I am also going to secure the audio cables to keep it from free wheeling around behind the seat.

I also wanted to try my new Crazed Pilot Headset.  It seemed to work just fine but I will need to get comfortable with its over the ear wires.

Please post any comments or questions you may have on the Tackform bracket, Crazed Pilot headset or Video hook up.

Need a CFI with Commander Time

Weather has canceled my transition training this weekend and the CFI I had scheduled will not be available again until July.

I honestly would love to fly our Commander, ASAP. Unfortunately 3 Tango Charlie and I sit waiting. I'm tired of just making airplane noises and we really need to get in the air.

To meet insurance requirements I'm looking for a CFI with 1000TT, 250 Retract, and 25 in Type (Commander 112A).

Email, or comment, if you or a CFI you know can help me out.
Getting desperate in OC 


UPDATE!!

I have made contact with a CFII that has Commander time, and lives within an hour flight time from Ocean City.  We are going to schedule transition time in the next few weeks.

Vlog Update 5/4/2019

A Vlog update that shows my camera equipment and exterior mounting system. I did have interior footage but it was poor quality since I was in the plane, and in the hangar.

I hope to get a video put together when I resolve my mounting issue with the headliner. Maybe in the next few days. 

I was also asked to provide a walk around of the Commander, inside and out. That could be fun and I'll use some of the pictures from the annual inspection.

Lynx NGT 9000 ADSB Transponder

Chet K and I swapped text messages and agreed to meet in Ocean City at his hangar at 10am.  Chet is heading to the Bahamas mid May and he wants to get his IFly GPS paired with his new Lynx NGT9000 ADSB Transponder. He was having some problems despite following the instructions.

We followed the instructions once again, but no luck matching what the instructions are telling us we should see. It was time to stray into the 'lets experiment' mode. For this round instead of selecting the Lynx we selected a generic search. All of a sudden we had a IP # and everything seemed to fall into place. There was only one way to truly test the system...FLY IT!

Mary and I cancelled the beach day since she was doing wash so I made sure she wanted to pass on sun and sand. With another confirmation she told me go fly...she knows me so well.

Chet and I saddled up for Cambridge, Maryland - KCGE.  We figured on a testing flight and lunch stop, a perfect combo. Upon departure from Ocean City the IFly came to life with weather info and traffic, plenty of traffic. There has to be a way to hide the distant traffic.

 Chet did all the flying, I did all the button pushing. We had audio alerts for traffic and the units were working together as one, seamlessly. There was one plane that departed CGE and we had the field to ourselves as Chet maneuvered us to land. We were the only aircraft on the ramp.

Kay's was busy but we walked in and were quickly seated. Chet had a burger and I had a BLT, both very good. We chatted about planes and ADSB while ate lunch. With full bellies we boarded 888 Bravo Whiskey and pointed for home.

Here are a few screen shots from the Lynx web page.  Overall I really like the transponder. The traffic screen and multiple map and weather pages, along with the METAR info is a real plus. The system also pairs very nicely with the IFly GPS.

Mode S Extended Squitter (ES) transponder with intuitive touch screen interface

Dual Mode 1090ES ADS-B Out plus 1090 and 978 ADS-B In

Designed for 14V and 28V installations

Patented Lynx Tail provides Flight ID, aircraft type and ground speed data of other ADS-B traffic

Internal rule compliant position source (WAAS-GPS)

Moving map including TFRs, airport databases and NOTAMs

Subscription-free ADS-B graphical and textual weather including NEXRAD, METARs, Winds &  Temps Aloft, AIRMETs and SIGMETs

Customizable layouts and information per pilot preference

Faceplate data port for maintenance personnel access to setup menus, software updates and option enablements via laptop

Options available for internal L-3 NextGen Active Traffic, Antenna Diversity, PED (iPad) WiFi connectivity and Remote Mount models

Meeting Blog Followers

Mary and I enjoyed lunch today with fellow Beech Talk forum member and blog follower Roy and his bride. We met up at a local Ocean City favorite, Fish Tales, for a fun time and good eats.

Roy and Lourdes hail from San Diego, California. We swapped a few private messages on the Beech Talk forum, and decided today would work for everyone. Roy and his bride are coming north from Norfolk, they were visiting their son who is serving in the Navy. Roy is also retired Navy. Mary and I thank them both for their service to our country.

Mary and I had a great time, all of us chatting and getting to know each other. It's always a pleasure to meet the people who follow our blog and a fellow pilot. When Mary and I head out to San Diego we look forward to meeting up once again.

Vlog Update 4/27/2019

I spent some time at the hangar cleaning out the parts and supplies that came with 3 Tango Charlie. Unfortunately, my sidekick Ziva didn't want to climb in the SUV so I was on my own.

First things first, unload the extra four Lycoming Cylinders that were pickled and boxed. For now I'll store the cylinders in the hangar but I want to get them off the concrete floor and on a pallet or some kind of raised barrier from the potential dampness.

I also unloaded all the log books and paper work that came with the plane. I wish I had taken a picture of everything spread all over my office here at the house, whew, what a mess. After two days I managed to set up the Adlog systems and a separate binder for all invoices.  Everything is now organized and in order. It was fun reading all the history of the plane, it's past owners, and maintenance.

Tentative schedule for transition training is May 10th through the 13th. It will be a three day event either starting on Friday or ending on Monday. Now I hope the weather holds.

3 Tango Charlie is Home!

Tuesday 4/23/19

The anticipation ramped up yesterday once Bill confirmed he would be flying 3 Tango Charlie to Ocean City tomorrow.

I decided I best get over to the hangar and clean up.  I loaded up Ziva girl and headed to the airport. Ziva Diva went for a short run then came back to hang out while I went through extension cords and set up the charger on the tug.

I also broke out the leaf blower to clean the floor, Ziva went and stood outside the hangar, she wanted no part of that air blast.

Wednesday 4/24/2019

Today, 3 Tango Charlie was delivered to Ocean City Maryland. The previous owner, Bill, departed Hamilton Ohio (KHAO) around 9AM and headed east for Ocean City, (KOXB).



The flight to OXB took approximately three hours. I had my camera, hand held radio and iPhone to track the flight.  Mary and I opened up the hangar and positioned the tug across from the hangar on the grass, ready for the arrival.  We then got back in the SUV to wait out the last 30 minutes of the flight.

Together, my bride and I watched a school plane do round after round of full stop landings. I'm not sure how Mary felt but my nervous anticipation level was peaking. Then I heard it...."Ocean City Traffic, Commander 3 Tango Charlie 11 miles west, inbound full stop three two."

The school plane had just landed and worked its way back to three-two for another round. I told Mary the Cessna and Bill will meet at the crosswind, I had no doubt. Sure enough as 3 Tango Charlie made its way in, the school plane turned crosswind in front. Bill made a 360° and entered on 45° for the left down wind, advising number two to land.

I did manage some video, I only wish I had set the zoom a bit higher. More pictures and maybe another video tomorrow as I get things set up. Until transition training is complete I'll just have to sit in the left seat and make airplane noises. 



Introducing, 3 Tango Charlie

1976 Commander 112A

We did it, we bought another plane!

Mary and I decided the new plane MUST have two doors. We were not going to crawl in and out over seats again, and we wanted the added safety of an easier exit.

I joined the Commanders Owners Group (COG) to gain as much knowledge as possible when looking at aircraft. I was welcomed to the group and soon settled in just like at the Beech Aero Club(BAC)family.


Multiple Commander Owners pointed me to Judi Anderson of Suncoast Aviation, affectionately called the Commander Queen. Judi was very helpful providing the history to each aircraft I inquired about. When I contacted Judi about 3 Tango Charlie she provided a positive response highlighting the excellent maintenance history.

The Paint and interior is in very good condition. Cloth seats with leather trim may save the burning of legs ritual on those hot summer days.

This aircraft has the shoulder belts! The avionics package is complete, ready to fly. I have always had Garmin products so the transition to the GNS 480 is not a problem. I have a simulator that I downloaded and it helps with learning the buttonology. I will need to take time to learn every aspect of the Aspen 1000 PFD.

3 Tango Charlie has the GTX 330ES for ADSB 'out'. My ADSB 'in' solution will be the Foreflight Sentry. The Sentry also has a built in Co2 monitor.

By the numbers:

TTAF 5300
Engine Lycoming IO-360 C1D6 200hp
Prop Three blade hartzel
Fuel 68 gallons
Paint 8/10
Interior 8/10
Wing Loading 16.8 lbs/sq.ft.
Service Ceiling 13,900 ft
Max Ramp Weight 2650
Useful load  828lbs w/o back seats 867lbs

Avionics:
Aspen 1000 PFD w/Synthetic Vision

Garmin 480W
Bendix/King KX155
Garmin GTX 330 ES Transponder 1090MHz ADSB
Audio Panel PS Engineering PMA 8000B
Auto Pilot S-Tec 60-2 
BFG 1000 Storm Scope 

JPI EDM-711 Engine Monitor w/fuel flow
Standby Vacuum System SVS V
RC 200 Kannad 406mhz ELT

ForeFlight Sentry ADSB IN

The Want list:

• Reiff Standard preheat system (cylinders and sump)
• LED Nav Lights
• Pulse Oximeter
• Skyox two place regulator and cannulas w/oxymisers